This page shows how to change the LAN IP Address on the Pirelli V226N1W Swisscom router.
Other Pirelli V226N1W Swisscom Guides
This is the ip address guide for the Pirelli V226N1W Swisscom. We also have the following guides for the same router:
- Pirelli V226N1W Swisscom - Pirelli V226N1W Swisscom Login Instructions
- Pirelli V226N1W Swisscom - How to change the DNS settings on a Pirelli V226N1W Swisscom router
- Pirelli V226N1W Swisscom - Pirelli V226N1W Swisscom Screenshots
- Pirelli V226N1W Swisscom - Information About the Pirelli V226N1W Swisscom Router
- Pirelli V226N1W Swisscom - Reset the Pirelli V226N1W Swisscom
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Pirelli V226N1W Swisscom
To get started configuring the Pirelli V226N1W Swisscom LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Pirelli V226N1W Swisscom, follow our Pirelli V226N1W Swisscom Login Guide.
Change the LAN IP Address on a Pirelli V226N1W Swisscom
If you followed our login guide above then you should see this screen.
Now that you have decided to change your IP Address, the address you see when inside your local network, you need to first log into the Pirelli V226N1W - Swisscom. This take you to the Overview page. Next, click the choice of Setting at the top of the page. Then, click Network, which is on the left.
Configure the LAN section of your Pirelli V226N1W Swisscom
Once on this new page, place your cursor in the box labeled Router IP Address. Enter your new address you have chosen for your Router. We suggest using an address such as 192.168.1.1
Make sure to leave the Subnet Mask at 255.255.255.0
When you are done, click the Save button, it is in the lower left corner of the page.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Pirelli V226N1W Swisscom Info
Don't forget about our other Pirelli V226N1W Swisscom info that you might be interested in.
This is the ip address guide for the Pirelli V226N1W Swisscom. We also have the following guides for the same router:
- Pirelli V226N1W Swisscom - Pirelli V226N1W Swisscom Login Instructions
- Pirelli V226N1W Swisscom - How to change the DNS settings on a Pirelli V226N1W Swisscom router
- Pirelli V226N1W Swisscom - Pirelli V226N1W Swisscom Screenshots
- Pirelli V226N1W Swisscom - Information About the Pirelli V226N1W Swisscom Router
- Pirelli V226N1W Swisscom - Reset the Pirelli V226N1W Swisscom