Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Planet ADE-3400 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Planet ADE-3400 router.

Other Planet ADE-3400 Guides

This is the ip address guide for the Planet ADE-3400. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Planet ADE-3400

To get started configuring the Planet ADE-3400 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Planet ADE-3400, follow our Planet ADE-3400 Login Guide.

Change the LAN IP Address on a Planet ADE-3400

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Planet ADE-3400 router.

To change your IP Address, this is the address you see from inside your local network, first log into the Planet ADE-3400. You begin on the Status page. Next, click Interface Setup, located at the top of the page. Then, LAN below that.

Configure the LAN section of your Planet ADE-3400

router setup
This is the setup page from your Planet ADE-3400 router.

On this new page, place your cursor in the box marked IP Address. Enter your new address you have picked out for your Router. One good choice for an IP Address is 192.168.0.1 the one in this screenshot is good too.

Make sure that while you are making this change, do not change the IP Subnet Mask, this should remain at 255.255.255.0

Don't forget to Save before you exit.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Planet ADE-3400 Info

Don't forget about our other Planet ADE-3400 info that you might be interested in.

This is the ip address guide for the Planet ADE-3400. We also have the following guides for the same router: