Setup Router logo in white Setup router name logo in white
Get Software

Setup WiFi on the Planet ADN-4101

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

The Planet ADN-4101 router is considered a wireless router because it offers WiFi connectivity. WiFi, or simply wireless, allows you to connect various devices to your router, such as wireless printers, smart televisions, and WiFi enabled smartphones.

Other Planet ADN-4101 Guides

This is the wifi guide for the Planet ADN-4101. We also have the following guides for the same router:

WiFi Terms

Before we get started there is a little bit of background info that you should be familiar with.

Wireless Name

Your wireless network needs to have a name to uniquely identify it from other wireless networks. If you are not sure what this means we have a guide explaining what a wireless name is that you can read for more information.

Wireless Password

An important part of securing your wireless network is choosing a strong password.

Wireless Channel

Picking a WiFi channel is not always a simple task. Be sure to read about WiFi channels before making the choice.

Encryption

You should almost definitely pick WPA2 for your networks encryption. If you are unsure, be sure to read our WEP vs WPA guide first.

Login To The Planet ADN-4101

To get started configuring the Planet ADN-4101 WiFi settings you need to login to your router. If you are already logged in you can skip this step.

To login to the Planet ADN-4101, follow our Planet ADN-4101 Login Guide.

Find the WiFi Settings on the Planet ADN-4101

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Planet ADN-4101 router.

After you've logged into the Planet ADN-4101 router you should be taken to the System Status page. To change your wireless network settings click Network near the top of the page and then Basic in the left hand sidebar.

Change the WiFi Settings on the Planet ADN-4101

wifi wireless
This is the wifi setup page from your Planet ADN-4101 router.

This brings you to the page seen above.

First make sure the Band is set to 2.4 GHz (B+G+N).

Next you'll need to set an SSID. This will serve as your network identification and can be whatever you like. However due to security reasons we strongly recommend avoiding the use of any personal information. To learn more be sure to visit our Wireless Names Guide.

After that open the drop down menu labeled Channel Number. This needs to be set to 1, 6, or 11. Why are these the best options? Read our WiFi Channels Guide.

That's it for this page. Just be sure to click Apply Changes before moving on.

Now click Security on the left hand side of the page.

router wifi security wireless
This is the wifi security page from your Planet ADN-4101 router.

You should be taken to a new page.

Set the Encryption to WPA2. This will provide you with the best security. For more information be sure to visit our WEP vs. WPA Guide.

Next set the WPA Authentication Mode to Personal (Pre-Shared Key).

The Pre-Shared Key Format needs to be set to Passphrase.

Finally you'll set a Pre-Shared Key. This will be your network password and can be whatever you want it to be. However, keep in mind that a strong password consists of 14-20 characters and includes no personal information. For more help be sure to check out our Choosing a Strong Password Guide.

That's it! You're finished. Just don't forget to click Apply Changes before closing the page.

Possible Problems when Changing your WiFi Settings

After making these changes to your router you will almost definitely have to reconnect any previously connected devices. This is usually done at the device itself and not at your computer.

Other Planet ADN-4101 Info

Don't forget about our other Planet ADN-4101 info that you might be interested in.

This is the wifi guide for the Planet ADN-4101. We also have the following guides for the same router: