Reset the Pluscom BR7-WP3221

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This guide shows you how to reset your Pluscom BR7-WP3221 router. Resetting a router is different than rebooting a router. Every time your router loses power it reboots. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: This is not a step to be taken lightly. When you reset your router, the following will happen.

  • The router's login and password are reset.
  • Your WiFi name and password are reset.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • Any parental controls, firewall settings, or port forwards will be removed.

A router reset is the last step you should take in recovering your router's password. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Pluscom BR7-WP3221 Guides

This is the reset router guide for the Pluscom BR7-WP3221. We also have the following guides for the same router:

Recover Password in Pluscom BR7-WP3221

Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

If you are unable to recover your lost router password, then you may have to proceed with a full router reset.

Reset the Pluscom BR7-WP3221

Most of the time you can find a small reset button located on either the back or the bottom of a router. This is what a typical reset button looks like:

Router Reset Button

Yours may look slightly different, but they are usually tiny. Sometimes the button is under a pinhole, and you need a paper clip to push it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Just don't forget that this will totally reset your Pluscom BR7-WP3221 router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Pluscom BR7-WP3221

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. You can find all of the information that you need in our BR7-WP3221 Login Guide.

Change Your Password

Be sure to change your router's default password after you get logged back in. The factory default passwords for routers are very well known. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.

Other Pluscom BR7-WP3221 Guides

If you want additional help with your Pluscom BR7-WP3221 be sure to check out some of our other guides.

This is the reset router guide for the Pluscom BR7-WP3221. We also have the following guides for the same router: