Setup Router logo in white Setup router name logo in white
Get Software

Reset the Pluscom WR2-RTL8186

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This guide shows you how to reset your Pluscom WR2-RTL8186 router. A router reset is very different than a router reboot. Unplugging a router from the wall reboots it. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings in your router will be changed:

  • The router's login credentials are reset to factory defaults.
  • Your WiFi login, password, and network name are reset.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Pluscom WR2-RTL8186 Guides

This is the reset router guide for the Pluscom WR2-RTL8186. We also have the following guides for the same router:

Recover Password in Pluscom WR2-RTL8186

Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the Pluscom WR2-RTL8186

Most of the time you can find a small reset button located on either the back or the bottom of a router. This is what a typical reset button looks like:

Router Reset Button

Your reset button may look different, but usually they are very small. Sometimes the button is under a pinhole, and you need a paper clip to push it.

Watch the front panel lights while you hold the reset button down for at least 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.

Don't forget, this step will totally reset your Pluscom WR2-RTL8186 router back to factory settings.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the Pluscom WR2-RTL8186

Now you need to log in using the factory default username and password. We have a WR2-RTL8186 Login Guide with all this information ready for you.

Change Your Password

After logging in, you should really change your router's password for added security. Leaving a router password set to default is a very serious security risk. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other Pluscom WR2-RTL8186 Guides

If you want additional help with your Pluscom WR2-RTL8186 be sure to check out some of our other guides.

This is the reset router guide for the Pluscom WR2-RTL8186. We also have the following guides for the same router: