Setup Router logo in white Setup router name logo in white
Get Software

Reset the Primus AudioCodes-MP252BW

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This guide shows you how to reset your Primus AudioCodes-MP252BW router. Resetting a router is different than rebooting a router. A reboot happens every time a router loses power. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: Proceed with caution; resetting your router can be a major headache. The following settings in your router will be changed:

  • The router's login and password are reset to factory defaults.
  • Your WiFi name and password are reset.
  • Your ISP username and password will be reset, and you may have to contact your ISP.
  • Any firewall settings, parental controls, and port forwards that you have configured will be removed.

Resetting your router should be considered the last step. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Primus AudioCodes-MP252BW Guides

This is the reset router guide for the Primus AudioCodes-MP252BW. We also have the following guides for the same router:

Recover Password in Primus AudioCodes-MP252BW

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

If you are unable to recover your lost router password, then you may have to proceed with a full router reset.

Reset the Primus AudioCodes-MP252BW

On most routers you can find a small button on the back or the bottom labeled reset. Look for something that looks like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. Sometimes the button is under a pinhole, and you need a paper clip to push it.

Watch the front panel lights while you hold the reset button down for at least 10 seconds. The lights on the front of the router should do something different when the reset happens. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Just don't forget that this will totally reset your Primus AudioCodes-MP252BW router.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the Primus AudioCodes-MP252BW

Once the reset is complete, you need to login to your router using the default IP address, username, and password. We have a AudioCodes-MP252BW Login Guide with all this information ready for you.

Change Your Password

After logging in to your router for the first time, you need to change your router's password. The factory default passwords for routers are very well known. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other Primus AudioCodes-MP252BW Guides

If you want additional help with your Primus AudioCodes-MP252BW be sure to check out some of our other guides.

This is the reset router guide for the Primus AudioCodes-MP252BW. We also have the following guides for the same router: