Setup Router logo in white Setup router name logo in white
Get Software

Reset the Quicktel QAR367E4W TEData

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

If you need to reset your Quicktel QAR367E4W TEData router back to factory settings, then this article shows you how. This is not the same thing as rebooting a router. Rebooting a router is simply turning it off and back on again. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings in your router will be changed:

  • The router's username and password are reset.
  • All WiFi settings are reset, including network name and password.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

A router reset is the last step you should take in recovering your router's password. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Quicktel QAR367E4W TEData Guides

This is the reset router guide for the Quicktel QAR367E4W TEData. We also have the following guides for the same router:

Recover Password in Quicktel QAR367E4W TEData

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.

Reset the Quicktel QAR367E4W TEData

There is usually a small reset button located on either the back or the bottom of a router. This is what a typical reset button looks like:

Router Reset Button

Reset buttons are usually tiny. Yours may look slightly different than this. You may need a paper clip to push the reset button.

Hold the reset button down for 10 seconds and watch the lights. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.

Keep in mind that this will completely reset your Quicktel QAR367E4W TEData router.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the Quicktel QAR367E4W TEData

Now you need to log in using the factory default username and password. You can follow the QAR367E4W TEData Login Guide to find everything that you need to log in.

Change Your Password

Do not forget to change your router's default password when you log back into it. It's a very bad idea to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.

Other Quicktel QAR367E4W TEData Guides

We have collected a lot of information about the Quicktel QAR367E4W TEData router. You can find some of our additional content here.

This is the reset router guide for the Quicktel QAR367E4W TEData. We also have the following guides for the same router: