This page shows how to change the LAN IP Address on the RadioLabs O2 Storm router.
Other RadioLabs O2 Storm Guides
This is the ip address guide for the RadioLabs O2 Storm. We also have the following guides for the same router:
- RadioLabs O2 Storm - Reset the RadioLabs O2 Storm
- RadioLabs O2 Storm - RadioLabs O2 Storm Login Instructions
- RadioLabs O2 Storm - RadioLabs O2 Storm User Manual
- RadioLabs O2 Storm - How to change the DNS settings on a RadioLabs O2 Storm router
- RadioLabs O2 Storm - Setup WiFi on the RadioLabs O2 Storm
- RadioLabs O2 Storm - Information About the RadioLabs O2 Storm Router
- RadioLabs O2 Storm - RadioLabs O2 Storm Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The RadioLabs O2 Storm
To get started configuring the RadioLabs O2 Storm LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the RadioLabs O2 Storm, follow our RadioLabs O2 Storm Login Guide.
Change the LAN IP Address on a RadioLabs O2 Storm
If you followed our login guide above then you should see this screen.
After you first log into the RadioLabs O2Storm you begin on the Router Status page. To get to the page to change your Router IP Address, the address you are going to see when inside your local network, click the TCP/IP Settings file. This opens a couple new choices, click the one labeled LAN Interface.
Configure the LAN section of your RadioLabs O2 Storm
You should now be on the LAN Interface Setup page. Place you cursor in the box labeled IP Address and enter the new address you have picked out for your Router. We suggest using either the one you see in this screenshot or 192.168.0.1
While making this change, be sure you do not change the Subnet Mask, this should remain at 255.255.255.0 Also leave the DHCP Server alone, it should be enabled.
When you have finished, click the Apply Changes button.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other RadioLabs O2 Storm Info
Don't forget about our other RadioLabs O2 Storm info that you might be interested in.
This is the ip address guide for the RadioLabs O2 Storm. We also have the following guides for the same router:
- RadioLabs O2 Storm - Reset the RadioLabs O2 Storm
- RadioLabs O2 Storm - RadioLabs O2 Storm Login Instructions
- RadioLabs O2 Storm - RadioLabs O2 Storm User Manual
- RadioLabs O2 Storm - How to change the DNS settings on a RadioLabs O2 Storm router
- RadioLabs O2 Storm - Setup WiFi on the RadioLabs O2 Storm
- RadioLabs O2 Storm - Information About the RadioLabs O2 Storm Router
- RadioLabs O2 Storm - RadioLabs O2 Storm Screenshots