In this article, you will learn how to reset your Raisecom ISCOM HT803G-WS2 back to factory settings. This is not the same thing as rebooting a router. Unplugging a router from the wall reboots it. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: Before you continue, there are a few things you need to know. A router reset will affect the following settings:
- The router's login and password are reset to factory defaults.
- All WiFi login information and network names are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any parental controls, firewall settings, or port forwards will be removed.
Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Raisecom ISCOM HT803G-WS2 Guides
This is the reset router guide for the Raisecom ISCOM HT803G-WS2 3.90. We also have the following guides for the same router:
Recover Password in Raisecom ISCOM HT803G-WS2
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the Raisecom ISCOM HT803G-WS2
Usually there is a reset button located on the back or bottom of a router. Look for something that looks like this:
Your reset button may look different, but usually they are very small. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Hold the reset button down for 10 seconds and watch the lights. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Do not worry about holding the button down too long; this is harmless.
Remember, this will totally reset your Raisecom ISCOM HT803G-WS2 router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Raisecom ISCOM HT803G-WS2
Once the reset is complete, you need to login to your router using the default IP address, username, and password. You can follow the ISCOM HT803G-WS2 Login Guide to find everything that you need to log in.
Change Your Password
You need to change your router's default password after you log in for the first time. It's a very bad idea to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other Raisecom ISCOM HT803G-WS2 Guides
If you want additional help with your Raisecom ISCOM HT803G-WS2 be sure to check out some of our other guides.
This is the reset router guide for the Raisecom ISCOM HT803G-WS2 3.90. We also have the following guides for the same router: