Setup Router logo in white Setup router name logo in white
Get Software

Reset the Repotec RP-WR1440A

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This guide shows you how to reset your Repotec RP-WR1440A router. Resetting a router is different than rebooting a router. Unplugging a router from the wall reboots it. However, when you reset a router you, return it back to its factory default settings.

Warning: Make sure that you fully understand the following before resetting your router. A router reset will affect the following settings:

  • The router's login credentials are reset to factory defaults.
  • Your WiFi login, password, and network name are reset.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • Any port forwards, firewall settings, or parental controls that you have configured will be removed.

Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Repotec RP-WR1440A Guides

This is the reset router guide for the Repotec RP-WR1440A. We also have the following guides for the same router:

Recover Password in Repotec RP-WR1440A

Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

A router reset should be the last thing you try if you are unable to login.

Reset the Repotec RP-WR1440A

Most of the time you can find a small reset button located on either the back or the bottom of a router. This is what a typical reset button looks like:

Router Reset Button

Yours may look slightly different, but they are usually tiny. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Watch the front panel lights while you hold the reset button down for at least 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Keep in mind that this will completely reset your Repotec RP-WR1440A router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Repotec RP-WR1440A

After you are finished resetting your router, you need to login in using the original factory username and password. Just follow our RP-WR1440A Login Guide to find all of the information that you need.

Change Your Password

You need to change your router's default password after you log in for the first time. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: Write your new password down on a post-it note and stick it to the bottom of your router.

Other Repotec RP-WR1440A Guides

Here are some of our other Repotec RP-WR1440A guides that you might be interested in.

This is the reset router guide for the Repotec RP-WR1440A. We also have the following guides for the same router: