Setup Router logo in white Setup router name logo in white
Get Software

Setup WiFi on the Repotec RP-WR1440A

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

The Repotec RP-WR1440A router is considered a wireless router because it offers WiFi connectivity. WiFi, or simply wireless, allows you to connect various devices to your router, such as wireless printers, smart televisions, and WiFi enabled smartphones.

Other Repotec RP-WR1440A Guides

This is the wifi guide for the Repotec RP-WR1440A. We also have the following guides for the same router:

WiFi Terms

Before we get started there is a little bit of background info that you should be familiar with.

Wireless Name

Your wireless network needs to have a name to uniquely identify it from other wireless networks. If you are not sure what this means we have a guide explaining what a wireless name is that you can read for more information.

Wireless Password

An important part of securing your wireless network is choosing a strong password.

Wireless Channel

Picking a WiFi channel is not always a simple task. Be sure to read about WiFi channels before making the choice.

Encryption

You should almost definitely pick WPA2 for your networks encryption. If you are unsure, be sure to read our WEP vs WPA guide first.

Login To The Repotec RP-WR1440A

To get started configuring the Repotec RP-WR1440A WiFi settings you need to login to your router. If you are already logged in you can skip this step.

To login to the Repotec RP-WR1440A, follow our Repotec RP-WR1440A Login Guide.

Find the WiFi Settings on the Repotec RP-WR1440A

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Repotec RP-WR1440A router.

We begin on the Status page of the Repotec RP-WR1440A. From here, select the Basic Settings option beneath the Wireless tab on the left hand side of the page.

Change the WiFi Settings on the Repotec RP-WR1440A

wifi wireless
This is the wifi setup page from your Repotec RP-WR1440A router.

This takes you to the page you see here.

To start, you want to set the SSID. This the name of your network and what you can use to identify it. What you enter here isn't vital, but we recommend staying away from any personal information. For more information on this topic, click this link.

Next, you should make sure the Channel Number is set to either 1, 6, or 11. To learn why this is important, check out our guide.

Make sure to click Apply Changes before leaving.

From here, click Security on the left hand sidebar, beneath the Wireless tab.

router wifi security wireless
This is the wifi security page from your Repotec RP-WR1440A router.

You should now be on the page you see above.

First, make sure the Encryption is set to WPA2. Then select the Personal (Pre-Shared Key) next to WPA Authentication Mode. Also make sure that the WPA2 Cipher Suite is set to AES. To learn why this is the most secure, check out our WEP vs. WPA Guide.

After that, you'll need to set the Pre-Shared Key. First, make sure the Pre-Shared Key Format is set to Passphrase. Finally you can set the Pre-Shared Key. To learn more on creating a strong password, click this link.

Be sure to click Apply Changes when you're finished.

Possible Problems when Changing your WiFi Settings

After making these changes to your router you will almost definitely have to reconnect any previously connected devices. This is usually done at the device itself and not at your computer.

Other Repotec RP-WR1440A Info

Don't forget about our other Repotec RP-WR1440A info that you might be interested in.

This is the wifi guide for the Repotec RP-WR1440A. We also have the following guides for the same router: