How to change the IP Address on a Rosewill RNX-EasyN4 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Rosewill RNX-EasyN4 router.

Other Rosewill RNX-EasyN4 Guides

This is the ip address guide for the Rosewill RNX-EasyN4. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Rosewill RNX-EasyN4

To get started configuring the Rosewill RNX-EasyN4 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Rosewill RNX-EasyN4, follow our Rosewill RNX-EasyN4 Login Guide.

Change the LAN IP Address on a Rosewill RNX-EasyN4

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Rosewill RNX-EasyN4 router.

After logging into the Rosewill RNX-EasyN4 you see the Status page of your Router. On the top in the grey bar are some different choices, click the one labeled LAN. This should take you to the correct page to change your Router IP Address, the address you are able to see when inside your local network.

Configure the LAN section of your Rosewill RNX-EasyN4

router setup
This is the setup page from your Rosewill RNX-EasyN4 router.

Next, place your cursor in the box labeled IP Address and enter the new address you have picked out for your Router. One suggestion for you is 192.168.1.1

While you can change your Router IP Address, we recommend that you do not change the Subnet Mask, this should, ideally, stay at 255.255.255.0

When you have finished making these changes, click Apply.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Rosewill RNX-EasyN4 Info

Don't forget about our other Rosewill RNX-EasyN4 info that you might be interested in.

This is the ip address guide for the Rosewill RNX-EasyN4. We also have the following guides for the same router: