Reset the Sagem Fast 2504 Sky

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

If you need to reset your Sagem Fast 2504 Sky router back to factory settings, then this article shows you how. A router reset is a much bigger deal than a router reboot. Every time your router loses power it reboots. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: Proceed with caution; resetting your router can be a major headache. The following settings in your router will be changed:

  • The router's username and password are reset.
  • All WiFi settings are reset, including network name and password.
  • Any ISP settings saved in your router will be removed. You may have to contact your ISP.
  • Any parental controls, firewall settings, or port forwards will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Sagem Fast 2504 Sky Guides

This is the reset router guide for the Sagem Fast 2504 Sky. We also have the following guides for the same router:

Recover Password in Sagem Fast 2504 Sky

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the Sagem Fast 2504 Sky

Most routers have a small button on either the back or the bottom. Look for something that looks like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Hold the reset button down for 10 seconds and watch the lights. The blinking pattern of the lights on the front of the router should change when the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Don't forget, this step will totally reset your Sagem Fast 2504 Sky router back to factory settings.

This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.

Login to the Sagem Fast 2504 Sky

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. You can follow the Fast 2504 Sky Login Guide to find everything that you need to log in.

Change Your Password

After logging in, you should really change your router's password for added security. It's a very bad idea to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other Sagem Fast 2504 Sky Guides

Here are some of our other Sagem Fast 2504 Sky guides that you might be interested in.

This is the reset router guide for the Sagem Fast 2504 Sky. We also have the following guides for the same router: