Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Sagem FAST 2864 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Sagem FAST 2864 router.

Other Sagem FAST 2864 Guides

This is the ip address guide for the Sagem FAST 2864. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Sagem FAST 2864

To get started configuring the Sagem FAST 2864 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Sagem FAST 2864, follow our Sagem FAST 2864 Login Guide.

Change the LAN IP Address on a Sagem FAST 2864

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Sagem FAST 2864 router.

When you are done logging into the Sagem FAST 2864 you are put on the Connection Hub page of your Router. To change your IP Address, the address you can see from inside your local network, click the choice on the left labeled Network, which is under the main heading of Settings.

Configure the LAN section of your Sagem FAST 2864

router setup
This is the setup page from your Sagem FAST 2864 router.

On this new page there are some new choices, one of them is DHCP, choose this one. Next, place your cursor in the first of the four boxes labeled Router IP Address, and enter your new address you have chosen for your Router. We would like to recommend using an address such as 192.168.1.1

Please leave the DHCP Status enabled, and leave the Subnet Mask at 255.255.255.0

When you are finished, make sure to save before exiting.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Sagem FAST 2864 Info

Don't forget about our other Sagem FAST 2864 info that you might be interested in.

This is the ip address guide for the Sagem FAST 2864. We also have the following guides for the same router: