Setup Router logo in white Setup router name logo in white
Get Software

Reset the Sagem Livebox FTTHv2

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

In this article, you will learn how to reset your Sagem Livebox FTTHv2 back to factory settings. A router reset is a much bigger deal than a router reboot. A reboot happens every time a router loses power. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: This is not a step to be taken lightly. A router reset will affect the following settings:

  • The router's username and password are reset to factory defaults.
  • Your WiFi name and password are reset.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • Any parental controls, firewall settings, or port forwards will be removed.

A router reset is the last step you should take in recovering your router's password. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Sagem Livebox FTTHv2 Guides

This is the reset router guide for the Sagem Livebox FTTHv2. We also have the following guides for the same router:

Recover Password in Sagem Livebox FTTHv2

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

A router reset should be the last thing you try if you are unable to login.

Reset the Sagem Livebox FTTHv2

Most routers have a small button on either the back or the bottom. A typical reset button looks like this:

Router Reset Button

Reset buttons are usually tiny. Yours may look slightly different than this. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. Do not worry about holding the button down too long; this is harmless.

Remember, this will totally reset your Sagem Livebox FTTHv2 router.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the Sagem Livebox FTTHv2

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can find all of the information that you need in our Livebox FTTHv2 Login Guide.

Change Your Password

After logging in to your router for the first time, you need to change your router's password. The factory default passwords for routers are very well known. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other Sagem Livebox FTTHv2 Guides

If you want additional help with your Sagem Livebox FTTHv2 be sure to check out some of our other guides.

This is the reset router guide for the Sagem Livebox FTTHv2. We also have the following guides for the same router: