How to change the IP Address on a Sagemcom 3764 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Sagemcom 3764 router.

Other Sagemcom 3764 Guides

This is the ip address guide for the Sagemcom 3764 PL Orange. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Sagemcom 3764

To get started configuring the Sagemcom 3764 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Sagemcom 3764, follow our Sagemcom 3764 Login Guide.

Change the LAN IP Address on a Sagemcom 3764

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Sagemcom 3764 router.

After you have logged into the Sagemcom 3764-Orange-PL you see the Home page of this Router. To change your IP Address, the actual address of your Router, click the choice on the left labeled DHCP which is under the heading of Configuration.

Configure the LAN section of your Sagemcom 3764

router setup
This is the setup page from your Sagemcom 3764 router.

You are now on a page like the one above. Find the four boxes labeled Router IP Address and enter your new address you have chosen for your Router. One easy address to remember is 192.168.1.1

Nothing else should be changed on this page. Make sure to save when you are finished.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Sagemcom 3764 Info

Don't forget about our other Sagemcom 3764 info that you might be interested in.

This is the ip address guide for the Sagemcom 3764 PL Orange. We also have the following guides for the same router: