In this article, you will learn how to reset your Sagemcom Fast 5364 back to factory settings. Resetting a router is different than rebooting a router. Turning a router off and back on again causes a reboot. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Make sure that you fully understand the following before resetting your router. The following settings in your router will be changed:
- The router's login and password are reset to factory defaults.
- All WiFi login information and network names are reset.
- Any ISP settings saved in your router will be removed. You may have to contact your ISP.
- Any parental controls, firewall settings, or port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Sagemcom Fast 5364 Guides
This is the reset router guide for the Sagemcom Fast 5364 SG4K1000t400t TalkTalk. We also have the following guides for the same router:
- Sagemcom Fast 5364 SG4K10002816t TalkTalk - Login to the Sagemcom Fast 5364
- Sagemcom Fast 5364 SG4K10002816t TalkTalk - Information About the Sagemcom Fast 5364 Router
- Sagemcom Fast 5364 SG4K10002816t TalkTalk - Reset the Sagemcom Fast 5364
Recover Password in Sagemcom Fast 5364
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the Sagemcom Fast 5364
There is usually a small reset button located on either the back or the bottom of a router. Look at your router and try to find something that looks like this:
Reset buttons are usually tiny. Yours may look slightly different than this. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Remember, this will totally reset your Sagemcom Fast 5364 router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the Sagemcom Fast 5364
After you are finished resetting your router, you need to login in using the original factory username and password. Just follow our Fast 5364 Login Guide to find all of the information that you need.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Sagemcom Fast 5364 Guides
If you want additional help with your Sagemcom Fast 5364 be sure to check out some of our other guides.
This is the reset router guide for the Sagemcom Fast 5364 SG4K1000t400t TalkTalk. We also have the following guides for the same router:
- Sagemcom Fast 5364 SG4K10002816t TalkTalk - Login to the Sagemcom Fast 5364
- Sagemcom Fast 5364 SG4K10002816t TalkTalk - Information About the Sagemcom Fast 5364 Router
- Sagemcom Fast 5364 SG4K10002816t TalkTalk - Reset the Sagemcom Fast 5364