This guide shows you how to reset your Sagemcom Fast 5370e router. A router reset is very different than a router reboot. Unplugging a router from the wall reboots it. However, when you reset a router you, return it back to its factory default settings.
Warning: Before you proceed, there are a few things you need to know. When you reset your router, the following will happen.
- The router's login and password are reset.
- All WiFi login information and network names are reset.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- Any parental controls, firewall settings, or port forwards will be removed.
Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Sagemcom Fast 5370e Guides
This is the reset router guide for the Sagemcom Fast 5370e SG4T1E000606C Telia. We also have the following guides for the same router:
Recover Password in Sagemcom Fast 5370e
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the Sagemcom Fast 5370e
Most of the time you can find a small reset button located on either the back or the bottom of a router. This is what a typical reset button looks like:
Your reset button may look different, but usually they are very small. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Do not worry about holding the button down too long; this is harmless.
Remember, this will erase everything you have previously done to this Sagemcom Fast 5370e router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Sagemcom Fast 5370e
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Just follow our Fast 5370e Login Guide to find all of the information that you need.
Change Your Password
After logging in, you should really change your router's password for added security. Leaving a router password set to default is a very serious security risk. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other Sagemcom Fast 5370e Guides
If you want additional help with your Sagemcom Fast 5370e be sure to check out some of our other guides.
This is the reset router guide for the Sagemcom Fast 5370e SG4T1E000606C Telia. We also have the following guides for the same router: