This guide shows you how to reset your Seowonintech SLC-120S07OG router. Resetting a router is different than rebooting a router. A reboot happens every time a router loses power. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: This is not a step to be taken lightly. The following settings will be changed in your router:
- The router's login and password are reset.
- All WiFi login information and network names are reset.
- All ISP settings will reset to default, and you may have to contact your ISP.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Seowonintech SLC-120S07OG Guides
This is the reset router guide for the Seowonintech SLC-120S07OG. We also have the following guides for the same router:
Recover Password in Seowonintech SLC-120S07OG
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
A router reset should be the last thing you try if you are unable to login.
Reset the Seowonintech SLC-120S07OG
You can usually find a small reset button on either the back or the bottom of a router. A typical reset button looks like this:
Your reset button may look different, but usually they are very small. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. The blinking pattern of the lights on the front of the router should change when the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Remember, this will totally reset your Seowonintech SLC-120S07OG router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Seowonintech SLC-120S07OG
Once the reset is complete, you need to login to your router using the default IP address, username, and password. Our SLC-120S07OG Login Guide has all of the information that you need.
Change Your Password
After logging in, you should really change your router's password for added security. It's a very bad idea to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Seowonintech SLC-120S07OG Guides
We have collected a lot of information about the Seowonintech SLC-120S07OG router. You can find some of our additional content here.
This is the reset router guide for the Seowonintech SLC-120S07OG. We also have the following guides for the same router: