Setup Router logo in white Setup router name logo in white
Get Software

Reset the Siemens Gigaset SE567

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

This is the reset guide for the Siemens Gigaset SE567 router. A router reset is a much bigger deal than a router reboot. A reboot happens every time a router loses power. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: Proceed with caution; resetting your router can be a major headache. The following settings will be changed in your router:

  • The router's login and password are reset to factory defaults.
  • All WiFi settings are reset, including network name and password.
  • Your ISP username and password will be reset, and you may have to contact your ISP.
  • Any firewall settings, parental controls, and port forwards that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Siemens Gigaset SE567 Guides

This is the reset router guide for the Siemens Gigaset SE567. We also have the following guides for the same router:

Recover Password in Siemens Gigaset SE567

Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the Siemens Gigaset SE567

Usually there is a reset button located on the back or bottom of a router. Look for something that looks like this:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Hold the reset button down for about 10 seconds while watching the lights on the front of your router. The blinking pattern of the lights on the front of the router should change when the reset is complete. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Just don't forget that this will totally reset your Siemens Gigaset SE567 router.

This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.

Login to the Siemens Gigaset SE567

After you are finished resetting your router, you need to login in using the original factory username and password. We have a Gigaset SE567 Login Guide with all this information ready for you.

Change Your Password

After logging in, you should really change your router's password for added security. It's a very bad idea to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other Siemens Gigaset SE567 Guides

This isn't our only Siemens Gigaset SE567 guide. We also have the following guides for this router.

This is the reset router guide for the Siemens Gigaset SE567. We also have the following guides for the same router: