Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Siemens SL2-141 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Siemens SL2-141 router.

Other Siemens SL2-141 Guides

This is the ip address guide for the Siemens SL2-141. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Siemens SL2-141

To get started configuring the Siemens SL2-141 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Siemens SL2-141, follow our Siemens SL2-141 Login Guide.

Change the LAN IP Address on a Siemens SL2-141

If you followed our login guide above then you should see this screen.

repimg 11154 repimg

When your needing to change your Router IP Address, the address you see when inside your network, first log into the Siemens SL2-141. This places you on the Device Info page. Second, click the LAN button on the left side of the screen.

Configure the LAN section of your Siemens SL2-141

repimg 7880 repimg

You are now on the LAN Setup screen of your Router. Take your cursor and place it in the box marked IP Address and enter the new address you have chosen for your Router. One good choice is the address of 192.168.1.254

While changing your IP Address, be sure to leave the DHCP Server enabled and the Subnet Mask at 255.255.255.0

When you are done, click Save.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Siemens SL2-141 Info

Don't forget about our other Siemens SL2-141 info that you might be interested in.

This is the ip address guide for the Siemens SL2-141. We also have the following guides for the same router: