Here are instructions for logging in to the Sitecom WL-348 router.
Other Sitecom WL-348 Guides
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
This is the login guide for the Sitecom WL-348. We also have the following guides for the same router:
- Sitecom WL-348 - How to change the IP Address on a Sitecom WL-348 router
- Sitecom WL-348 - Sitecom WL-348 User Manual
- Sitecom WL-348 - Setup WiFi on the Sitecom WL-348
- Sitecom WL-348 - Information About the Sitecom WL-348 Router
- Sitecom WL-348 - Sitecom WL-348 Screenshots
- Sitecom WL-348 - Reset the Sitecom WL-348
Find Your Sitecom WL-348 Router IP Address
Before you can log in to your Sitecom WL-348 router, you need to figure out it's internal IP address.
Known WL-348 IP Addresses |
---|
192.168.1.254 |
192.168.0.1 |
Choose an IP address from the list above and then follow the rest of this guide.
If later on in this guide you do not find your router using the IP address that you pick, then you can try different IP addresses until you get logged in. It is harmless to try different IP addresses.
If you try all of the above IP addresses and still cannot find your router, then you can try one of the following steps:
- Use our Find Your Router's Internal IP Address guide.
- Use our free Router Detector software.
The next step is to try logging in to your router.
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
Login to the Sitecom WL-348 Router
The Sitecom WL-348 is managed through a web-based interface. The way you manage it is by using a web browser like Firefox, Edge, or Chrome.
Enter Sitecom WL-348 Internal IP Address
Either copy/paste or type the internal IP address of your Sitecom WL-348 router into the address bar of your web browser. The address bar will look like this:
Press the Enter key on your keyboard. You will see a window asking for your Sitecom WL-348 password.
Sitecom WL-348 Default Username and Password
You need to know your username and password to login to your Sitecom WL-348. If you are not sure what the username and password are, then perhaps they are still set to the factory defaults. Try all of the Sitecom WL-348 factory default usernames and passwords below.
Sitecom WL-348 Default Usernames and Passwords | |
---|---|
Username | Password |
admin | admin |
Put your username and password in the appropriate boxes. Keep trying them all until you get logged in.
Sitecom WL-348 Home Screen
Once you are logged in you will see the Sitecom WL-348 home screen, like this:
If you see this screen, then you know that you are logged in to your Sitecom WL-348 router. At this point, you can follow any of our other guides for this router.
Solutions To Sitecom WL-348 Login Problems
If you are having problems getting logged in to your router, here are a few ideas for you to try.
Sitecom WL-348 Password Doesn't Work
Perhaps your router's default password is different than what we have listed here. You should try other Sitecom passwords. Head over to our list of all Sitecom Passwords.
Forgot Password to Sitecom WL-348 Router
If your ISP provided your router, then you may have to call them and ask them if they know how to login to your router. Sometimes they will have your password on file.
How to Reset the Sitecom WL-348 Router To Default Settings
Your last option when you are unable to get logged in is to reset your router to factory default settings. You can follow our How To Reset your Router guide for help.
Other Sitecom WL-348 Guides
Here are some of our other Sitecom WL-348 info that you might be interested in.
This is the login guide for the Sitecom WL-348. We also have the following guides for the same router:
- Sitecom WL-348 - How to change the IP Address on a Sitecom WL-348 router
- Sitecom WL-348 - Sitecom WL-348 User Manual
- Sitecom WL-348 - Setup WiFi on the Sitecom WL-348
- Sitecom WL-348 - Information About the Sitecom WL-348 Router
- Sitecom WL-348 - Sitecom WL-348 Screenshots
- Sitecom WL-348 - Reset the Sitecom WL-348