Reset the Sitecom X4 N300

This article covers how to reset the Sitecom X4 N300 router back to factory default settings. A router reset is very different than a router reboot. Rebooting a router is simply turning it off and back on again. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: Proceed with caution; resetting your router can be a major headache. The following settings in your router will be changed:

• The router's username and password are reset to factory defaults.
• All WiFi settings are reset, including network name and password.
• All ISP settings will reset to default, and you may have to contact your ISP.
• Any firewall settings, parental controls, or port forwards that you have configured will be removed.

Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Sitecom X4 N300 Guides

Use a VPN

Have you considered using a VPN when you connect to the internet? A VPN is a great way to increase your security and anonymity while surfing.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes securely sharing your home network super simple. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

• Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
• Make sure that your VPN provider has lots of exit nodes all around the world.
• Check that your VPN will not affect your speed.
• Verify that your VPN provider uses WireGuard as the underlying protocol.
• Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the reset router guide for the Sitecom X4 N300. We also have the following guides for the same router:

• Sitecom X4 N300 - Setup WiFi on the Sitecom X4 N300
• Sitecom X4 N300 - How to change the IP Address on a Sitecom X4 N300 router
• Sitecom X4 N300 - Sitecom X4 N300 Login Instructions
• Sitecom X4 N300 - Sitecom X4 N300 User Manual
• Sitecom X4 N300 - Sitecom X4 N300 Screenshots
• Sitecom X4 N300 - Information About the Sitecom X4 N300 Router

Recover Password in Sitecom X4 N300

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.

Reset the Sitecom X4 N300

Don't forget to sign up for NordVPN's promo deal before it's gone.

You can usually find a small reset button on either the back or the bottom of a router. A typical reset button looks like this:

Yours may look slightly different, but they are usually tiny. You may need a paper clip to push the reset button.

Watch the lights on the front of your router and hold the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.

Just don't forget that this will totally reset your Sitecom X4 N300 router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Sitecom X4 N300

After you are finished resetting your router, you need to login in using the original factory username and password. We have a X4 N300 Login Guide with all this information ready for you.

Change Your Password

After logging in to your router for the first time, you need to change your router's password. It is a huge security risk to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: Write your new password down on a post-it note and stick it to the bottom of your router.

Other Sitecom X4 N300 Guides

Here are some of our other Sitecom X4 N300 guides that you might be interested in.

This is the reset router guide for the Sitecom X4 N300. We also have the following guides for the same router:

• Sitecom X4 N300 - Setup WiFi on the Sitecom X4 N300
• Sitecom X4 N300 - How to change the IP Address on a Sitecom X4 N300 router
• Sitecom X4 N300 - Sitecom X4 N300 Login Instructions
• Sitecom X4 N300 - Sitecom X4 N300 User Manual
• Sitecom X4 N300 - Sitecom X4 N300 Screenshots
• Sitecom X4 N300 - Information About the Sitecom X4 N300 Router