This guide shows you how to reset your Sky SR101 router. Resetting a router is different than rebooting a router. Rebooting a router is simply turning it off and back on again. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: Before you continue, there are a few things you need to know. A router reset will affect the following settings:
- The router's login credentials are reset to factory defaults.
- All WiFi information such as network name, password, and authentication method are erased.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- Any parental controls, firewall settings, or port forwards will be removed.
Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Sky SR101 Guides
This is the reset router guide for the Sky SR101. We also have the following guides for the same router:
Recover Password in Sky SR101
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the Sky SR101
On most routers you can find a small button on the back or the bottom labeled reset. A typical reset button looks like this:
Reset buttons are usually tiny. Yours may look slightly different than this. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. You can hold the button down as long as you like, it will not hurt anything.
Just don't forget that this will totally reset your Sky SR101 router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Sky SR101
Once the reset is complete, you need to login to your router using the default IP address, username, and password. Our SR101 Login Guide has all of the information that you need.
Change Your Password
After logging in, you should really change your router's password for added security. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other Sky SR101 Guides
Here are some of our other Sky SR101 guides that you might be interested in.
This is the reset router guide for the Sky SR101. We also have the following guides for the same router: