Setup Router logo in white Setup router name logo in white
Get Software

Reset the Sky SR203

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

This is the reset guide for the Sky SR203 router. A router reset is a much bigger deal than a router reboot. Every time your router loses power it reboots. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: This is not a step to be taken lightly. The following settings will be changed in your router:

  • The router's login and password are reset to factory defaults.
  • All WiFi login information and network names are reset.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • All port forwards, firewall settings, and parental controls that you have configured will be removed.

Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Sky SR203 Guides

This is the reset router guide for the Sky SR203 5.14.2405.R. We also have the following guides for the same router:

Recover Password in Sky SR203

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

If you are unable to recover your lost router password, then you may have to proceed with a full router reset.

Reset the Sky SR203

Most routers have a small button on either the back or the bottom. A typical reset button looks like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. You may need a paper clip to push the reset button.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. It is harmless to hold the reset button too long.

Don't forget, this step will totally reset your Sky SR203 router back to factory settings.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the Sky SR203

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can find all of the information that you need in our SR203 Login Guide.

Change Your Password

After logging in to your router for the first time, you need to change your router's password. The factory default passwords for routers are very well known. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other Sky SR203 Guides

This isn't our only Sky SR203 guide. We also have the following guides for this router.

This is the reset router guide for the Sky SR203 5.14.2405.R. We also have the following guides for the same router: