Reset the SmartRG SR350N

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This is the reset guide for the SmartRG SR350N router. This is not the same thing as rebooting a router. A reboot happens every time a router loses power. However, when you reset a router you, return it back to its factory default settings.

Warning: Before you continue, there are a few things you need to know. A router reset will affect the following settings:

  • The router's login and password are reset to factory defaults.
  • Your WiFi login, password, and network name are reset.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • All parental controls, firewall settings, and port forwards will be removed.

Resetting your router should be considered the last step. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other SmartRG SR350N Guides

This is the reset router guide for the SmartRG SR350N. We also have the following guides for the same router:

Recover Password in SmartRG SR350N

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.

Reset the SmartRG SR350N

On most routers you can find a small button on the back or the bottom labeled reset. Most reset buttons look like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Hold the reset button down for about 10 seconds while watching the lights on the front of your router. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.

Just don't forget that this will totally reset your SmartRG SR350N router.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the SmartRG SR350N

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. Just follow our SR350N Login Guide to find all of the information that you need.

Change Your Password

Do not forget to change your router's default password when you log back into it. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.

Other SmartRG SR350N Guides

If you want additional help with your SmartRG SR350N be sure to check out some of our other guides.

This is the reset router guide for the SmartRG SR350N. We also have the following guides for the same router: