Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a SMC SMC7004ABR router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the SMC SMC7004ABR router.

Other SMC SMC7004ABR Guides

This is the ip address guide for the SMC SMC7004ABR. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The SMC SMC7004ABR

To get started configuring the SMC SMC7004ABR LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the SMC SMC7004ABR, follow our SMC SMC7004ABR Login Guide.

Change the LAN IP Address on a SMC SMC7004ABR

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your SMC SMC7004ABR router.

Now that you have decided to change your Router IP Address, the address you see when inside your local network, first log into the SMC SMC7004ABR. This places you on the Home page. There are three choices on this page, choose the furthest one to the right labeled Advanced Setup. Once the page changes, there are more choices on the left side bar. Choose the one labeled LAN.

Configure the LAN section of your SMC SMC7004ABR

router setup
This is the setup page from your SMC SMC7004ABR router.

On this new page, place your cursor in the first of the four boxes labeled IP Address and enter your new address you have picked out for your Router. We suggest using the address 192.168.1.254

Once you are done making this change, click the Apply button at the bottom of the screen.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other SMC SMC7004ABR Info

Don't forget about our other SMC SMC7004ABR info that you might be interested in.

This is the ip address guide for the SMC SMC7004ABR. We also have the following guides for the same router: