Setup Router logo in white Setup router name logo in white
Get Software

Reset the SMC SMC7008ABR

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

In this article, you will learn how to reset your SMC SMC7008ABR back to factory settings. A router reset is a much bigger deal than a router reboot. Every time your router loses power it reboots. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: Proceed with caution; resetting your router can be a major headache. The following settings in your router will be changed:

  • The router's login and password are reset.
  • All WiFi settings are reset, including network name and password.
  • Any ISP settings saved in your router will be removed. You may have to contact your ISP.
  • All parental controls, firewall settings, and port forwards will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router you may want to try recovering your router password with our Router Password Finder.

Other SMC SMC7008ABR Guides

This is the reset router guide for the SMC SMC7008ABR. We also have the following guides for the same router:

Recover Password in SMC SMC7008ABR

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

If you are unable to recover your lost router password, then you may have to proceed with a full router reset.

Reset the SMC SMC7008ABR

On most routers you can find a small button on the back or the bottom labeled reset. Look at your router and try to find something that looks like this:

Router Reset Button

Your reset button may look different, but usually they are very small. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Hold the reset button down for about 10 seconds while watching the lights on the front of your router. After a few seconds the lights should blink differently. When this happens, the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Remember, this will erase everything you have previously done to this SMC SMC7008ABR router.

This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.

Login to the SMC SMC7008ABR

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. We have a SMC7008ABR Login Guide with all this information ready for you.

Change Your Password

You need to change your router's default password after you log in for the first time. Leaving a router password set to default is a very serious security risk. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other SMC SMC7008ABR Guides

We have collected a lot of information about the SMC SMC7008ABR router. You can find some of our additional content here.

This is the reset router guide for the SMC SMC7008ABR. We also have the following guides for the same router: