How to change the IP Address on a Symphony SY602 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Symphony SY602 router.

Other Symphony SY602 Guides

This is the ip address guide for the Symphony SY602.We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Symphony SY602

To get started configuring the Symphony SY602 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Symphony SY602, follow our Symphony SY602 Login Guide.

Change the LAN IP Address on a Symphony SY602

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Symphony router.

After you have finished logging into the Symphony SY602 you see the Device Info page for this Router. When you need to change your Router IP Address, the address you see when inside your local network, click the file on the left labeled Advanced Setup, then LAN.

Configure the LAN section of your Symphony SY602

router setup
This is the setup page from your Symphony router.

This will open a new page labeled Local Area Network (LAN) Setup. Place your cursor in the box labeled IP Address and enter the new address you have chosen for your Router. One good option is the address of 192.168.0.1

Please be sure to leave the Subnet Mask at 255.255.255.0 You should also leave the DHCP Server enabled, this allows the Router to choose from a group of addresses for you when needed.

When you have finished, you need to click the button labeled Save/Reboot.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Symphony SY602 Info

Don't forget about our other Symphony SY602 info that you might be interested in.

This is the ip address guide for the Symphony SY602.We also have the following guides for the same router: