Reset the Technicolor MediaAccess TG789vac v2 iiNet

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This guide shows you how to reset your Technicolor MediaAccess TG789vac v2 iiNet router. A router reset is very different than a router reboot. Every time your router loses power it reboots. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: This is not a step to be taken lightly. A router reset will affect the following settings:

  • The router's username and password are reset.
  • All WiFi settings are reset, including network name and password.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Technicolor MediaAccess TG789vac v2 iiNet Guides

This is the reset router guide for the Technicolor MediaAccess TG789vac v2 iiNet. We also have the following guides for the same router:

Recover Password in Technicolor MediaAccess TG789vac v2 iiNet

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

If you are unable to recover your lost router password, then you may have to proceed with a full router reset.

Reset the Technicolor MediaAccess TG789vac v2 iiNet

Usually there is a reset button located on the back or bottom of a router. What you are looking for is something that looks like this:

Router Reset Button

Your reset button may look different, but usually they are very small. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Watch the lights on the front of your router and hold the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. It is harmless to hold the reset button too long.

Just don't forget that this will totally reset your Technicolor MediaAccess TG789vac v2 iiNet router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Technicolor MediaAccess TG789vac v2 iiNet

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. Just follow our MediaAccess TG789vac v2 iiNet Login Guide to find all of the information that you need.

Change Your Password

You need to change your router's default password after you log in for the first time. The factory default passwords for routers are very well known. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.

Other Technicolor MediaAccess TG789vac v2 iiNet Guides

Here are some of our other Technicolor MediaAccess TG789vac v2 iiNet guides that you might be interested in.

This is the reset router guide for the Technicolor MediaAccess TG789vac v2 iiNet. We also have the following guides for the same router: