How to change the IP Address on a Technicolor TC7200-U router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Technicolor TC7200-U router.

Other Technicolor TC7200-U Guides

This is the ip address guide for the Technicolor TC7200-U. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Technicolor TC7200-U

To get started configuring the Technicolor TC7200-U LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Technicolor TC7200-U, follow our Technicolor TC7200-U Login Guide.

Change the LAN IP Address on a Technicolor TC7200-U

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Technicolor TC7200-U router.

After you have logged into the Technicolor TC7200-U you see the Status page. To change your IP Address, the address you see when inside your local network, click the choice at the top, in the blue bar labeled Basic. Then on the left, Local Area Network.

Configure the LAN section of your Technicolor TC7200-U

router setup
This is the setup page from your Technicolor TC7200-U router.

You are now on the correct page. The first box is the IP Address. Enter your new address you have picked out for your router in this box. Make this address something you will remember, such as 10.0.0.1

Next is the Subnet Mask, it is important to leave this as it is. It should be at 255.255.255.0

Keep the DHCP Server enabled, which allows the router to choose from a group of addresses when needed.

When you have finished, click the blue button near the bottom of the page labeled Save.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Technicolor TC7200-U Info

Don't forget about our other Technicolor TC7200-U info that you might be interested in.

This is the ip address guide for the Technicolor TC7200-U. We also have the following guides for the same router: