This article covers how to reset the Technicolor TG589vn v2 router back to factory default settings. Resetting a router is different than rebooting a router. Rebooting a router is simply turning it off and back on again. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings in your router will be changed:
- The router's login and password are reset to factory defaults.
- Your WiFi name and password are reset.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Technicolor TG589vn v2 Guides
This is the reset router guide for the Technicolor TG589vn v2. We also have the following guides for the same router:
Recover Password in Technicolor TG589vn v2
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the Technicolor TG589vn v2
On most routers you can find a small button on the back or the bottom labeled reset. What you are looking for is something that looks like this:
Your reset button may look different, but usually they are very small. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The lights on the front of the router should do something different when the reset happens. Do not worry about holding the button down too long; this is harmless.
Just don't forget that this will totally reset your Technicolor TG589vn v2 router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Technicolor TG589vn v2
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. Just follow our TG589vn v2 Login Guide to find all of the information that you need.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. It's a very bad idea to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other Technicolor TG589vn v2 Guides
We have collected a lot of information about the Technicolor TG589vn v2 router. You can find some of our additional content here.
This is the reset router guide for the Technicolor TG589vn v2. We also have the following guides for the same router: