Setup Router logo in white Setup router name logo in white
Get Software

Reset the Telstra AC753S

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This article covers how to reset the Telstra AC753S router back to factory default settings. A router reset is a much bigger deal than a router reboot. Turning a router off and back on again causes a reboot. This is different from a reset because a reset completely erases all settings from the router.

Warning: Proceed with caution; resetting your router can be a major headache. A router reset will affect the following settings:

  • The router's login credentials are reset.
  • All WiFi information such as network name, password, and authentication method are erased.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Telstra AC753S Guides

This is the reset router guide for the Telstra AC753S. We also have the following guides for the same router:

Recover Password in Telstra AC753S

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the Telstra AC753S

You can usually find a small reset button on either the back or the bottom of a router. Look at your router and try to find something that looks like this:

Router Reset Button

Your reset button may look different, but usually they are very small. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Hold the reset button down for about 10 seconds while watching the lights on the front of your router. The blinking pattern of the lights on the front of the router should change when the reset is complete. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Don't forget, this step will totally reset your Telstra AC753S router back to factory settings.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Telstra AC753S

After you are finished resetting your router, you need to login in using the original factory username and password. We have a AC753S Login Guide with all this information ready for you.

Change Your Password

Be sure to change your router's default password after you get logged back in. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.

Other Telstra AC753S Guides

Here are some of our other Telstra AC753S guides that you might be interested in.

This is the reset router guide for the Telstra AC753S. We also have the following guides for the same router: