This article covers how to reset the Tenda AC10U router back to factory default settings. This is a much bigger deal than a router reboot. Turning a router off and back on again causes a reboot. A Router Reset completely erases the router and returns it to factory settings.
Warning: Proceed with caution; resetting your router can be a major headache. The following settings in your router will be changed:
- The router's login credentials are reset to factory defaults.
- All WiFi settings are reset, including network name and password.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router you may want to try recovering your router password with our Router Password Finder.
Other Tenda AC10U Guides
This is the reset router guide for the Tenda AC10U v15.03.06.48_multi. We also have the following guides for the same router:
Recover Password in Tenda AC10U
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the Tenda AC10U
On most routers you can find a small button on the back or the bottom labeled reset. A typical reset button looks like this:
Even though yours may look slightly different, you need to look for a tiny button. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. You can hold the button down as long as you like, it will not hurt anything.
Keep in mind that this will completely reset your Tenda AC10U router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Tenda AC10U
After you are finished resetting your router, you need to login in using the original factory username and password. We have a AC10U Login Guide with all this information ready for you.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other Tenda AC10U Guides
If you want additional help with your Tenda AC10U be sure to check out some of our other guides.
This is the reset router guide for the Tenda AC10U v15.03.06.48_multi. We also have the following guides for the same router: