This article covers how to reset the Tenda N301 router back to factory default settings. A router reset is a much bigger deal than a router reboot. A reboot happens every time a router loses power. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: This is not a step to be taken lightly. The following settings will be changed in your router:
- The router's login credentials are reset to factory defaults.
- All WiFi settings are reset, including network name and password.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- Any firewall settings, parental controls, and port forwards that you have configured will be removed.
Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Tenda N301 Guides
This is the reset router guide for the Tenda N301 v03.03.01.133_multi. We also have the following guides for the same router:
- Tenda N301 v03.03.01.133_multi - Login to the Tenda N301
- Tenda N301 v03.03.01.133_multi - Information About the Tenda N301 Router
Recover Password in Tenda N301
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
A router reset should be the last thing you try if you are unable to login.
Reset the Tenda N301
There is usually a small reset button located on either the back or the bottom of a router. This is what a typical reset button looks like:
Yours may look slightly different, but they are usually tiny. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Hold the reset button down for 10 seconds and watch the lights. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. It is harmless to hold the reset button too long.
Remember, this will totally reset your Tenda N301 router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the Tenda N301
Now you need to log in using the factory default username and password. We have a N301 Login Guide with all this information ready for you.
Change Your Password
Do not forget to change your router's default password when you log back into it. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Tenda N301 Guides
Here are some of our other Tenda N301 guides that you might be interested in.
This is the reset router guide for the Tenda N301 v03.03.01.133_multi. We also have the following guides for the same router:
- Tenda N301 v03.03.01.133_multi - Login to the Tenda N301
- Tenda N301 v03.03.01.133_multi - Information About the Tenda N301 Router