This page shows how to change the LAN IP Address on the Tenda W548D router.
Other Tenda W548D Guides
This is the ip address guide for the Tenda W548D. We also have the following guides for the same router:
- Tenda W548D - Tenda W548D User Manual
- Tenda W548D - Tenda W548D Login Instructions
- Tenda W548D - How to change the DNS settings on a Tenda W548D router
- Tenda W548D - Setup WiFi on the Tenda W548D
- Tenda W548D - Tenda W548D Screenshots
- Tenda W548D - Information About the Tenda W548D Router
- Tenda W548D - Reset the Tenda W548D
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Tenda W548D
To get started configuring the Tenda W548D LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Tenda W548D, follow our Tenda W548D Login Guide.
Change the LAN IP Address on a Tenda W548D
If you followed our login guide above then you should see this screen.
To change your Router IP Address, this is the address you see from inside your network, you need to log into the Tenda W548D. When you do this, it takes you to the Device Info page of this Router. Next, you need to click the Advanced Setting choice on the left side of your screen. Then, click LAN.
Configure the LAN section of your Tenda W548D
On this page, find the first box that is labeled IP Address and enter your new address in this box. For your Router IP Address, we recommend using 192.168.0.1
Beneath the IP Address is the Subnet Mask, this should remain at 255.255.255.0
Finally, you need to click Save/Reboot.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Tenda W548D Info
Don't forget about our other Tenda W548D info that you might be interested in.
This is the ip address guide for the Tenda W548D. We also have the following guides for the same router:
- Tenda W548D - Tenda W548D User Manual
- Tenda W548D - Tenda W548D Login Instructions
- Tenda W548D - How to change the DNS settings on a Tenda W548D router
- Tenda W548D - Setup WiFi on the Tenda W548D
- Tenda W548D - Tenda W548D Screenshots
- Tenda W548D - Information About the Tenda W548D Router
- Tenda W548D - Reset the Tenda W548D