This is the reset guide for the Tilgin HG2501 router. A router reset is a much bigger deal than a router reboot. Unplugging a router from the wall reboots it. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: Make sure that you fully understand the following before resetting your router. The following settings will be changed in your router:
- The router's login credentials are reset.
- All WiFi login information and network names are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Tilgin HG2501 Guides
This is the reset router guide for the Tilgin HG2501. We also have the following guides for the same router:
Recover Password in Tilgin HG2501
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the Tilgin HG2501
You can usually find a small reset button on either the back or the bottom of a router. What you are looking for is something that looks like this:
Reset buttons are usually tiny. Yours may look slightly different than this. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Remember, this will totally reset your Tilgin HG2501 router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Tilgin HG2501
After you are finished resetting your router, you need to login in using the original factory username and password. Just follow our HG2501 Login Guide to find all of the information that you need.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Tilgin HG2501 Guides
We have collected a lot of information about the Tilgin HG2501 router. You can find some of our additional content here.
This is the reset router guide for the Tilgin HG2501. We also have the following guides for the same router: