How to change the IP Address on a TOT DB120 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the TOT DB120 router.

Other TOT DB120 Guides

This is the ip address guide for the TOT DB120.We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

It is generally a good idea to make the last number of your router's internal IP address a '1', as in or This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The TOT DB120

To get started configuring the TOT DB120 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the TOT DB120, follow our TOT DB120 Login Guide.

Change the LAN IP Address on a TOT DB120

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your TOT router.

After you have logged into the TOT DB120 you should begin on the Status page of your Router. When you are needing to change your Router IP Address, the address you see from the inside of your network, click the choice on the top labeled Setup, then LAN Setup on the left.

Configure the LAN section of your TOT DB120

router setup
This is the setup page from your TOT router.

This new page should be called the LAN Setup page. Find the box labeled IP Address and enter your new address in this box for your Router. One suggestion is to use the address of

Most everything else on this page should be left as it is. The Subnet Mask, the access point that your network sees, should stay at The DHCP Server should also be left enabled, it automatically allows the Router to choose from a pool of addresses.

Finally, click Apply.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other TOT DB120 Info

Don't forget about our other TOT DB120 info that you might be interested in.

This is the ip address guide for the TOT DB120.We also have the following guides for the same router: