This page shows how to change the LAN IP Address on the Totolink N200RE router.
Other Totolink N200RE Guides
This is the ip address guide for the Totolink N200RE. We also have the following guides for the same router:
- Totolink N200RE - Reset the Totolink N200RE
- Totolink N200RE - Totolink N200RE Login Instructions
- Totolink N200RE - Totolink N200RE User Manual
- Totolink N200RE - Setup WiFi on the Totolink N200RE
- Totolink N200RE - Totolink N200RE Screenshots
- Totolink N200RE - Information About the Totolink N200RE Router
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Totolink N200RE
To get started configuring the Totolink N200RE LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Totolink N200RE, follow our Totolink N200RE Login Guide.
Change the LAN IP Address on a Totolink N200RE
If you followed our login guide above then you should see this screen.
This guide starts on the Home page of the Totolink N200RE router. To change your IP address click Network Settings on the left hand side of the page and then LAN/DHCP Server beneath that.
Configure the LAN section of your Totolink N200RE
This new page allows you to change your LAN IP address. Enter your new address into the given box. Don't know what you should change it to? One good option is 10.0.0.1
Below that you'll see the Subnet Mask. Leave this alone. It needs to stay at 255.255.255.0
Congratulations! You're finished. Just be sure to save your changes before leaving the page.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Totolink N200RE Info
Don't forget about our other Totolink N200RE info that you might be interested in.
This is the ip address guide for the Totolink N200RE. We also have the following guides for the same router:
- Totolink N200RE - Reset the Totolink N200RE
- Totolink N200RE - Totolink N200RE Login Instructions
- Totolink N200RE - Totolink N200RE User Manual
- Totolink N200RE - Setup WiFi on the Totolink N200RE
- Totolink N200RE - Totolink N200RE Screenshots
- Totolink N200RE - Information About the Totolink N200RE Router