This guide shows you how to reset your TP-Link AD2700 router to factory default settings. This is a much bigger deal than a router reboot. Unplugging a router from the wall reboots it. This is different from a reset because a reset completely erases all settings from the router.
Warning: This is not a step to be taken lightly. When you reset your router, the following will happen.
- The router's username and password are reset to factory defaults.
- All WiFi settings are reset, including network name and password.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any firewall settings, parental controls, and port forwards that you have configured will be removed.
Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other TP-Link AD2700 Guides
Use a VPN
Have you considered using a VPN when you connect to the internet? A VPN is a great way to increase your security and anonymity while surfing.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes securely sharing your home network super simple. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
This is the reset router guide for the TP-Link AD2700. We also have the following guides for the same router:
Recover Password in TP-Link AD2700
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the TP-Link AD2700
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
Most of the time you can find a small reset button located on either the back or the bottom of a router. A typical reset button looks like this:
Yours may look slightly different, but they are usually tiny. You may need a paper clip to push the reset button.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. You can hold the button down as long as you like, it will not hurt anything.
Keep in mind that this will completely reset your TP-Link AD2700 router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the TP-Link AD2700
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. You can find all of the information that you need in our AD2700 Login Guide.
Change Your Password
Be sure to change your router's default password after you get logged back in. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other TP-Link AD2700 Guides
We have collected a lot of information about the TP-Link AD2700 router. You can find some of our additional content here.
This is the reset router guide for the TP-Link AD2700. We also have the following guides for the same router: