If you need to login to the TP-Link Archer AX1800 v1.20 router, then this guide shows you how.
Other TP-Link Archer AX1800 v1.20 Guides
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
This is the login guide for the TP-Link Archer AX1800 v1.20 1.3.5. We also have the following guides for the same router:
Find Your TP-Link Archer AX1800 v1.20 Router IP Address
The first thing that we need to know in order to login to the TP-Link Archer AX1800 v1.20 router is it's internal IP address.
| Known Archer AX1800 v1.20 IP Addresses |
|---|
| 192.168.0.1 |
| http://tplinkwifi.net/ |
Start with the first IP address in the list and then follow the rest of this guide.
If later on in this guide you do not find your router using the IP address that you pick, then you can try different IP addresses until you get logged in. It should be completely harmless to try different IP addresses.
If you try all of the above IP addresses and still cannot find your router, then do one of the following:
- Use our Find Your Router's Internal IP Address guide.
- Use our free software called Router Detector.
Once you have the internal IP Address of your router, you can log in to it.
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
Login to the TP-Link Archer AX1800 v1.20 Router
Your TP-Link Archer AX1800 v1.20 is managed through a web-based interface. In order to log in to it, you need to use a web browser, such as Chrome, Firefox, or Edge.
Enter TP-Link Archer AX1800 v1.20 Internal IP Address
Either copy/paste or type the internal IP address of your TP-Link Archer AX1800 v1.20 router into the address bar of your web browser. Your address bar should look something like this:
Press the Enter key on your keyboard. You will be prompted for your TP-Link Archer AX1800 v1.20 password.
TP-Link Archer AX1800 v1.20 Default Username and Password
You must know your TP-Link Archer AX1800 v1.20 username and password in order to log in. It's possible that the router's password is still set to the factory default. All of the default usernames and passwords for the TP-Link Archer AX1800 v1.20 are listed below.
| TP-Link Archer AX1800 v1.20 Default Usernames and Passwords | |
|---|---|
| Username | Password |
| none | created during initial setup |
Enter your username and password in the window that pops up. You should be able to try them all.
TP-Link Archer AX1800 v1.20 Home Screen
If your password is correct then you will be logged in and see the TP-Link Archer AX1800 v1.20 home screen, which looks like this:
When you see this screen, then you are logged in to your TP-Link Archer AX1800 v1.20 router. You are ready to follow any of our other guides for this router.
Solutions To TP-Link Archer AX1800 v1.20 Login Problems
Here are some other ideas that might help you get logged in to your router.
TP-Link Archer AX1800 v1.20 Password Doesn't Work
Your router's factory default password might be different than what we have listed here. You should try other TP-Link passwords. Here is our list of all TP-Link Passwords.
Forgot Password to TP-Link Archer AX1800 v1.20 Router
If you are using an ISP provided router, then you may need to call their support desk and ask for your login information. Most of the time they will have it on file for you.
How to Reset the TP-Link Archer AX1800 v1.20 Router To Default Settings
If all else fails and you are unable to login to your router, then you may have to reset it to its factory default settings. As a last resort, you can reset your router to factory defaults.
Other TP-Link Archer AX1800 v1.20 Guides
Here are some of our other TP-Link Archer AX1800 v1.20 info that you might be interested in.
This is the login guide for the TP-Link Archer AX1800 v1.20 1.3.5. We also have the following guides for the same router: