This guide shows you how to reset your TP-Link Archer AX73 router. A router reset is a much bigger deal than a router reboot. Turning a router off and back on again causes a reboot. However, when you reset a router you, return it back to its factory default settings.
Warning: Before you continue, there are a few things you need to know. The following settings in your router will be changed:
- The router's login and password are reset to factory defaults.
- Your WiFi name and password are reset.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router you may want to try recovering your router password with our Router Password Finder.
Other TP-Link Archer AX73 Guides
This is the reset router guide for the TP-Link Archer AX73 1.0.1. We also have the following guides for the same router:
Recover Password in TP-Link Archer AX73
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the TP-Link Archer AX73
Most of the time you can find a small reset button located on either the back or the bottom of a router. This is what a typical reset button looks like:
Yours may look slightly different, but they are usually tiny. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. The lights on the front of the router should do something different when the reset happens. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Remember, this will erase everything you have previously done to this TP-Link Archer AX73 router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the TP-Link Archer AX73
Now you need to log in using the factory default username and password. You can follow the Archer AX73 Login Guide to find everything that you need to log in.
Change Your Password
After logging in, you should really change your router's password for added security. Leaving a router password set to default is a very serious security risk. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other TP-Link Archer AX73 Guides
Here are some of our other TP-Link Archer AX73 guides that you might be interested in.
This is the reset router guide for the TP-Link Archer AX73 1.0.1. We also have the following guides for the same router: