TP-Link Archer D5 v2 Login Instructions

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

If you need to login to the TP-Link Archer D5 v2 router, then this guide shows you how.

Other TP-Link Archer D5 v2 Guides

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN is the fastest VPN!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the login guide for the TP-Link Archer D5 v2. We also have the following guides for the same router:

Find Your TP-Link Archer D5 v2 Router IP Address

Before you can log in to your TP-Link Archer D5 v2 router, you need to figure out it's internal IP address.

Known Archer D5 v2 IP Addresses
192.168.1.1

Pick one of these IP addresses and then follow the rest of this guide.

If you do not find your router's interface later in this guide, then try a different IP address. Keep trying different IP addresses until you find your router. It should be completely harmless to try different IP addresses.

If you try all of the above IP addresses and still cannot find your router, then do one of the following:

After you find your router's internal IP Address, it is time to try logging in to it.

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN faster than ever deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Login to the TP-Link Archer D5 v2 Router

Your TP-Link Archer D5 v2 is managed through a web-based interface. You need to use a web browser to manage it, such as Chrome, Edge, or Firefox.

Enter TP-Link Archer D5 v2 Internal IP Address

Find the address bar in your web browser and type in the internal IP address of your TP-Link Archer D5 v2 router. The address bar looks like this:

Press the Enter key on your keyboard. You should see a window pop up asking you for your TP-Link Archer D5 v2 password.

TP-Link Archer D5 v2 Default Username and Password

In order to login to your TP-Link Archer D5 v2 you are going to need to know your username and password. If you are not sure what the username and password are, then perhaps they are still set to the factory defaults. Try all of the TP-Link Archer D5 v2 factory default usernames and passwords below.

TP-Link Archer D5 v2 Default Usernames and Passwords
UsernamePassword
noneadmin

Put your username and password in the appropriate boxes. You can try them all.

router login screen
This is the login page from your TP-Link Archer D5 v2 router.

TP-Link Archer D5 v2 Home Screen

If your password is correct then you will be logged in and see the TP-Link Archer D5 v2 home screen, which looks like this:

router status mac address internet IP
This is the status page from your TP-Link Archer D5 v2 router.

If you see this screen, then you know that you are logged in to your TP-Link Archer D5 v2 router. At this point, you can follow any of our other guides for this router.

Solutions To TP-Link Archer D5 v2 Login Problems

If you cannot get logged in to your router, here a few possible solutions you can try.

TP-Link Archer D5 v2 Password Doesn't Work

It's possible that your router's factory default password is different than what we have listed. You can try other TP-Link passwords. Head over to our list of all TP-Link Passwords.

Forgot Password to TP-Link Archer D5 v2 Router

If your Internet Service Provider supplied you with your router, then you might want to try giving them a call and see if they either know what your router's username and password are, or maybe they can reset it for you.

How to Reset the TP-Link Archer D5 v2 Router To Default Settings

If you still cannot get logged in, then you are probably going to have to reset your router to its default settings. You can follow our How To Reset your Router guide for help.

Other TP-Link Archer D5 v2 Guides

Here are some of our other TP-Link Archer D5 v2 info that you might be interested in.

This is the login guide for the TP-Link Archer D5 v2. We also have the following guides for the same router: