This page shows you how to login to the TP-Link Archer MR200 v5 router.
Other TP-Link Archer MR200 v5 Guides
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
This is the login guide for the TP-Link Archer MR200 v5 1.2.0 0.9.1 v0001.0. We also have the following guides for the same router:
Find Your TP-Link Archer MR200 v5 Router IP Address
The first thing that we need to know in order to login to the TP-Link Archer MR200 v5 router is it's internal IP address.
| Known Archer MR200 v5 IP Addresses |
|---|
| 192.168.1.1 |
| http://tplinkmodem.net/ |
Start with the first IP address in the list and then follow the rest of this guide.
If the IP address you picked does not seem to work, then simply try a different one. I will not hurt anything to try different IP addresses.
If, after trying all of the above IP addresses, you still cannot find your router, then you can try one of the following steps:
- Follow our Find Your Router's Internal IP Address guide.
- Download and install our free Router Detector software.
After you find your router's internal IP Address, it is time to try logging in to it.
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
Login to the TP-Link Archer MR200 v5 Router
Your TP-Link Archer MR200 v5 is managed through a web-based interface. You can manage it by using a web browser such as Chrome, Firefox, or Edge.
Enter TP-Link Archer MR200 v5 Internal IP Address
Either copy/paste or type the internal IP address of your TP-Link Archer MR200 v5 router into the address bar of your web browser. The address bar looks like this:
Press the Enter key on your keyboard. You will be prompted for your TP-Link Archer MR200 v5 password.
TP-Link Archer MR200 v5 Default Username and Password
In order to login to your TP-Link Archer MR200 v5 you are going to need to know your username and password. Just in case the router's username and password have never been changed, you may want to try the factory defaults. All of the default usernames and passwords for the TP-Link Archer MR200 v5 are listed below.
| TP-Link Archer MR200 v5 Default Usernames and Passwords | |
|---|---|
| Username | Password |
| none | created during initial setup |
Enter your username and password in the window that pops up. Keep trying them all until you get logged in.
TP-Link Archer MR200 v5 Home Screen
You should now see the TP-Link Archer MR200 v5 home Screen, which looks similar to this:
If you see this screen, then you know that you are logged in to your TP-Link Archer MR200 v5 router. You are ready to follow any of our other guides for this router.
Solutions To TP-Link Archer MR200 v5 Login Problems
Here are some ideas to help if you are having problems getting logged in to your router.
TP-Link Archer MR200 v5 Password Doesn't Work
It's possible that your router's factory default password is different than what we have listed. Be sure to try other TP-Link passwords. Here is our list of all TP-Link Passwords.
Forgot Password to TP-Link Archer MR200 v5 Router
If your ISP provided your router, then you may have to call them to get your login information. They will most likely have it on file.
How to Reset the TP-Link Archer MR200 v5 Router To Default Settings
Your last option when you are unable to get logged in is to reset your router to factory default settings. The last option when you are unable to get logged in to your router is to reset it to the factory defaults.
Other TP-Link Archer MR200 v5 Guides
Here are some of our other TP-Link Archer MR200 v5 info that you might be interested in.
This is the login guide for the TP-Link Archer MR200 v5 1.2.0 0.9.1 v0001.0. We also have the following guides for the same router: