This page shows you how to login to the TP-Link Archer MR200 v5 router.
Other TP-Link Archer MR200 v5 Guides
This is the login guide for the TP-Link Archer MR200 v5 1.0.0 0.9.1 v0001.0. We also have the following guides for the same router:
Find Your TP-Link Archer MR200 v5 Router IP Address
Before you can log in to your TP-Link Archer MR200 v5 router, you need to figure out it's internal IP address.
| Known Archer MR200 v5 IP Addresses |
|---|
| 192.168.1.1 |
| http://tplinkmodem.net/ |
Pick one of these IP addresses and then follow the rest of this guide.
If the IP address you picked does not seem to work, then simply try a different one. It should be completely harmless to try different IP addresses.
If you try all of the above IP addresses and still cannot find your router, then do one of the following:
- Follow our Find Your Router's Internal IP Address guide.
- Download and install our free Router Detector software.
Now that you have your router's internal IP Address, we are ready to login to it.
Login to the TP-Link Archer MR200 v5 Router
The TP-Link Archer MR200 v5 router has a web-based interface. The way you manage it is by using a web browser like Firefox, Edge, or Chrome.
Enter TP-Link Archer MR200 v5 Internal IP Address
Put the internal IP Address of your TP-Link Archer MR200 v5 in the address bar of your web browser. Your address bar should look something like this:
Press the Enter key on your keyboard. You will see a window asking for your TP-Link Archer MR200 v5 password.
TP-Link Archer MR200 v5 Default Username and Password
You must know your TP-Link Archer MR200 v5 username and password in order to log in. It's possible that the router's password is still set to the factory default. All of the default usernames and passwords for the TP-Link Archer MR200 v5 are listed below.
| TP-Link Archer MR200 v5 Default Usernames and Passwords | |
|---|---|
| Username | Password |
| none | created during initial setup |
Enter your username and password in the window that pops up. Keep trying them all until you get logged in.
TP-Link Archer MR200 v5 Home Screen
When you get logged in you should be at the TP-Link Archer MR200 v5 home screen, which looks similar to this:
If you see this screen, then good job, you are now logged in to your TP-Link Archer MR200 v5 router. At this point, you can follow any of our other guides for this router.
Solutions To TP-Link Archer MR200 v5 Login Problems
Here are some other ideas that might help you get logged in to your router.
TP-Link Archer MR200 v5 Password Doesn't Work
Perhaps your router's default password is different than what we have listed here. Be sure to try other TP-Link passwords. Head over to our list of all TP-Link Passwords.
Forgot Password to TP-Link Archer MR200 v5 Router
If you are using an ISP provided router, then you may need to call their support desk and ask for your login information. Most of the time they will have it on file for you.
How to Reset the TP-Link Archer MR200 v5 Router To Default Settings
If all else fails and you are unable to login to your router, then you may have to reset it to its factory default settings. You can follow our How To Reset your Router guide for help.
Other TP-Link Archer MR200 v5 Guides
Here are some of our other TP-Link Archer MR200 v5 info that you might be interested in.
This is the login guide for the TP-Link Archer MR200 v5 1.0.0 0.9.1 v0001.0. We also have the following guides for the same router: