Setup Router logo in white Setup router name logo in white
Get Software

TP-Link Archer MR200 Login Instructions

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 4 minutes

This page shows you how to login to the TP-Link Archer MR200 router.

Other TP-Link Archer MR200 Guides

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN is the fastest VPN!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the login guide for the TP-Link Archer MR200 0.9.1 1.1 v004a.0. We also have the following guides for the same router:

Find Your TP-Link Archer MR200 Router IP Address

In order to login to the TP-Link Archer MR200 router, we need to know it's internal IP address.

Known Archer MR200 IP Addresses
192.168.1.1

Start with the first IP address in the list and then follow the rest of this guide.

If you do not find your router's interface later in this guide, then try a different IP address. Keep trying different IP addresses until you find your router. I will not hurt anything to try different IP addresses.

If you try all of the above IP addresses and still cannot find your router, then do one of the following:

Choose an internal IP Address using one of the above methods and then try to login to your router.

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN faster than ever deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Login to the TP-Link Archer MR200 Router

Your TP-Link Archer MR200 is managed through a web-based interface. In order to log in to it, you need to use a web browser, such as Chrome, Firefox, or Edge.

Enter TP-Link Archer MR200 Internal IP Address

Put the internal IP Address of your TP-Link Archer MR200 in the address bar of your web browser. Your address bar should look something like this:

Press the Enter key on your keyboard. You should see a window asking for your TP-Link Archer MR200 password.

TP-Link Archer MR200 Default Username and Password

You need to know your username and password to login to your TP-Link Archer MR200. Just in case the router's username and password have never been changed, you may want to try the factory defaults. Below is a list of all known TP-Link Archer MR200 default usernames and passwords.

TP-Link Archer MR200 Default Usernames and Passwords
UsernamePassword
none create during initial setup

In the window that pops up, enter your username and password. Keep trying them all until you get logged in.

router login screen
This is the login page from your TP-Link Archer MR200 router.

TP-Link Archer MR200 Home Screen

When you get logged in you should be at the TP-Link Archer MR200 home screen, which looks similar to this:

router status mac address internet IP
This is the status page from your TP-Link Archer MR200 router.

If you see this screen, then congratulations, you are now logged in to your TP-Link Archer MR200. At this point, you can follow any of our other guides for this router.

Solutions To TP-Link Archer MR200 Login Problems

If you are having problems getting logged in to your router, here are a few ideas for you to try.

TP-Link Archer MR200 Password Doesn't Work

Your router's factory default password might be different than what we have listed here. Be sure to try other TP-Link passwords. Head over to our list of all TP-Link Passwords.

Forgot Password to TP-Link Archer MR200 Router

If your Internet Service Provider supplied you with your router, then you might want to try giving them a call and see if they either know what your router's username and password are, or maybe they can reset it for you.

How to Reset the TP-Link Archer MR200 Router To Default Settings

If all else fails and you are unable to login to your router, then you may have to reset it to its factory default settings. Our How To Reset your Router guide can help you reset your router to factory defaults.

Other TP-Link Archer MR200 Guides

Here are some of our other TP-Link Archer MR200 info that you might be interested in.

This is the login guide for the TP-Link Archer MR200 0.9.1 1.1 v004a.0. We also have the following guides for the same router: