This page shows you how to login to the TP-Link Archer MR600 v1 router.
Other TP-Link Archer MR600 v1 Guides
This is the login guide for the TP-Link Archer MR600 v1 1.0.0 0.9.1 v0001.0. We also have the following guides for the same router:
Find Your TP-Link Archer MR600 v1 Router IP Address
The first thing that we need to know in order to login to the TP-Link Archer MR600 v1 router is it's internal IP address.
| Known Archer MR600 v1 IP Addresses |
|---|
| 192.168.1.1 |
| http://tplinkmodem.net/ |
Pick one of these IP addresses and then follow the rest of this guide.
If you do not find your router's interface later in this guide, then try a different IP address. Keep trying different IP addresses until you find your router. I will not hurt anything to try different IP addresses.
If you try all of the above IP addresses and still cannot find your router, then you can try one of the following steps:
- Use our Find Your Router's Internal IP Address guide.
- Use our free Router Detector software.
After you find your router's internal IP Address, it is time to try logging in to it.
Login to the TP-Link Archer MR600 v1 Router
Your TP-Link Archer MR600 v1 is managed through a web-based interface. The way you manage it is by using a web browser like Firefox, Edge, or Chrome.
Enter TP-Link Archer MR600 v1 Internal IP Address
Find the address bar in your web browser and type in the internal IP address of your TP-Link Archer MR600 v1 router. The address bar looks like this:
Press the Enter key on your keyboard. You will be prompted for your TP-Link Archer MR600 v1 password.
TP-Link Archer MR600 v1 Default Username and Password
You must know your TP-Link Archer MR600 v1 username and password in order to log in. Just in case the router's username and password have never been changed, you may want to try the factory defaults. Try all of the TP-Link Archer MR600 v1 factory default usernames and passwords below.
| TP-Link Archer MR600 v1 Default Usernames and Passwords | |
|---|---|
| Username | Password |
| none | created during intial setup |
Enter your username and password in the window that pops up. Keep trying them all until you get logged in.
TP-Link Archer MR600 v1 Home Screen
If your password is correct then you will be logged in and see the TP-Link Archer MR600 v1 home screen, which looks like this:
If you see this screen, then good job, you are now logged in to your TP-Link Archer MR600 v1 router. Now you can follow any of our other guides for this router.
Solutions To TP-Link Archer MR600 v1 Login Problems
If you cannot get logged in to your router, here a few possible solutions you can try.
TP-Link Archer MR600 v1 Password Doesn't Work
Your router's factory default password might be different than what we have listed here. Start by trying all of the other known TP-Link passwords. We have an extensive list of all TP-Link Passwords that you can try.
Forgot Password to TP-Link Archer MR600 v1 Router
If your ISP provided your router, then you may have to call them and ask them if they know how to login to your router. Sometimes they will have your password on file.
How to Reset the TP-Link Archer MR600 v1 Router To Default Settings
Your last option when you are unable to get logged in is to reset your router to factory default settings. Your last option when you are unable to get logged in is to reset your router to factory default settings.
Other TP-Link Archer MR600 v1 Guides
Here are some of our other TP-Link Archer MR600 v1 info that you might be interested in.
This is the login guide for the TP-Link Archer MR600 v1 1.0.0 0.9.1 v0001.0. We also have the following guides for the same router: