This guide shows you how to reset your TP-Link Archer VR600v router. Resetting a router is different than rebooting a router. Turning a router off and back on again causes a reboot. This is different from a reset because a reset completely erases all settings from the router.
Warning: Make sure that you fully understand the following before resetting your router. The following settings in your router will be changed:
- The router's login credentials are reset to factory defaults.
- Your WiFi name and password are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any parental controls, firewall settings, or port forwards will be removed.
Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other TP-Link Archer VR600v Guides
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
This is the reset router guide for the TP-Link Archer VR600v v0.6.0. We also have the following guides for the same router:
Recover Password in TP-Link Archer VR600v
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
A router reset should be the last thing you try if you are unable to login.
Reset the TP-Link Archer VR600v
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
There is usually a small reset button located on either the back or the bottom of a router. Look for something that looks like this:
Reset buttons are usually tiny. Yours may look slightly different than this. You may need a paper clip to push the reset button.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. You can hold the button down as long as you like, it will not hurt anything.
Don't forget, this step will totally reset your TP-Link Archer VR600v router back to factory settings.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the TP-Link Archer VR600v
After you are finished resetting your router, you need to login in using the original factory username and password. You can find all of the information that you need in our Archer VR600v Login Guide.
Change Your Password
After logging in, you should really change your router's password for added security. Leaving a router password set to default is a very serious security risk. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other TP-Link Archer VR600v Guides
Here are some of our other TP-Link Archer VR600v guides that you might be interested in.
This is the reset router guide for the TP-Link Archer VR600v v0.6.0. We also have the following guides for the same router: