In this article, you will learn how to reset your TP-Link Archer X11000 back to factory settings. A router reset is a much bigger deal than a router reboot. Rebooting a router is simply turning it off and back on again. This is different from a reset because a reset completely erases all settings from the router.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings will be changed in your router:
- The router's login and password are reset.
- Your WiFi name and password are reset.
- All ISP settings will reset to default, and you may have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
A router reset is the last step you should take in recovering your router's password. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other TP-Link Archer X11000 Guides
This is the reset router guide for the TP-Link Archer X11000 1.2.3. We also have the following guides for the same router:
Recover Password in TP-Link Archer X11000
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the TP-Link Archer X11000
There is usually a small reset button located on either the back or the bottom of a router. A typical reset button looks like this:
Your reset button may look different, but usually they are very small. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. The lights on the front of the router should do something different when the reset happens. Do not worry about holding the button down too long; this is harmless.
Remember, this will erase everything you have previously done to this TP-Link Archer X11000 router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the TP-Link Archer X11000
Once the reset is complete, you need to login to your router using the default IP address, username, and password. You can follow the Archer X11000 Login Guide to find everything that you need to log in.
Change Your Password
Be sure to change your router's default password after you get logged back in. Leaving a router password set to default is a very serious security risk. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other TP-Link Archer X11000 Guides
This isn't our only TP-Link Archer X11000 guide. We also have the following guides for this router.
This is the reset router guide for the TP-Link Archer X11000 1.2.3. We also have the following guides for the same router: