This guide shows you how to reset your TP-Link M7350 router. A router reset is very different than a router reboot. A reboot happens every time a router loses power. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: This is not a step to be taken lightly. When you reset your router, the following will happen.
- The router's login and password are reset.
- All WiFi login information and network names are reset.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- All parental controls, firewall settings, and port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other TP-Link M7350 Guides
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
This is the reset router guide for the TP-Link M7350. We also have the following guides for the same router:
Recover Password in TP-Link M7350
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the TP-Link M7350
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
Most of the time you can find a small reset button located on either the back or the bottom of a router. What you are looking for is something that looks like this:
Yours may look slightly different, but they are usually tiny. You may need a paper clip to push the reset button.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.
Remember, this will totally reset your TP-Link M7350 router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the TP-Link M7350
After you are finished resetting your router, you need to login in using the original factory username and password. Just follow our M7350 Login Guide to find all of the information that you need.
Change Your Password
Be sure to change your router's default password after you get logged back in. It's a very bad idea to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other TP-Link M7350 Guides
Here are some of our other TP-Link M7350 guides that you might be interested in.
This is the reset router guide for the TP-Link M7350. We also have the following guides for the same router: